Williamstown
Williamstown is a townland in the civil parish of Nurney, barony of Carbury, Co. Kildare.
Parcel 1038671
- Area
- 973 m²
- Buildings
- 2 buildings touch it. Their footprint covers 66 m².
- Zoning
- No zone of a development plan covers it in the national zoning. Outside zoned towns and villages, the county development plan's rural policies apply.
- Townland
- Williamstown
Planning applications on this parcel
14 Oct 2025Conditional
EirGrid PLC, with the consent and approval of the Electricity Supply Board (ESB), intends to apply for permission for works to uprate the existing Rinawade – Dunfirth Tee – Kinnegad 110kV overhead line (OHL). Within County Meath, the proposed development will take place within the following townlands: JARRETSTOWN, WALTERSTOWN, MOOR OF MEATH, RATHLEEK, GRANGE, BOGGANSTOWN, CAPPAGHCREEN, BROWNSTOWN, SALESTOWN, AFFOLLUS, KILGRAIGUE, HARRISTOWN, PORTERSTOWN, KILCLONE, KIMMINS, BARROCKSTOWN, BALLYMAGILLIN, MULHUSSEY, FERRESTOWN, RODANSTOWN, BATTERSTOWN, DOLANSTOWN, CALGATH, BALFEAGHAN, KILGLIN, FERRANS, CASTLEJORDAN, GORTNAHORNA, KILLASKILLEN, CLONGALL, KNOCKERSALLY OR COLEHILL. The Rinawade - Dunfirth Tee - Kinnegad 110 kV OHL circuit runs through County Meath, County Kildare and County Offaly. It is 54 km in length and travels from Kinnegad 110 kV substation in Killaskillen (County Meath) and traverses southeast where a short loop into Dunfirth 110 kV substation in Dunfirth (County Kildare) exists. The line then continues southeast where it terminates at Rinawade 110kV substation in Rinawade Lower (County Kildare). The OHL has a total of 249no. supporting structures. Within the functional area of Meath County Council, there is 23.16 km of the existing OHL circuit, with 107 no. structures. Within the functional area of Kildare County Council there is 30.66 km, with 140 no. structures, and within the functional area of Offaly County Council there is 0.42 km, with 2 no. structures. Separate planning applications will be lodged with Kildare County Council and Offaly County Council. The proposed development within Co. Meath will comprise: • the replacement (“restringing”) of the existing OHL circuit conductor wires with a new higher capacity conductor between structure numbers 1 - 37, 185 - 214, and 218 - 223; • the replacement of angle mast in-situ at 1no. location, with a new angle mast; • the strengthening of tower foundations at 3no. locations; • the strengthening of towers (i.e., member replacement) at 5no. locations; • the painting of towers at 7no. locations; • shear block remedial works of towers at 1no. locations; • the replacement of polesets at 38no. locations, with similar structures. There will be no change in height at 12no. poleset replacements. There will be height increases between 0.1m and 2.0m at 26no. poleset replacements. • the replumbing of polesets at 11no. locations; • the replacement of insulating and ancillary hardware at
Permission · Meath County Council, 2561103
Source: National Planning Applications, Department of Housing, Local Government and Heritage, CC BY 4.0. Applicants are not shown.
Designated sites
No designated site (Special Area of Conservation, Special Protection Area, Natural Heritage Area or proposed one) touches this parcel.
Recorded monuments around it
No zone of notification of a recorded monument touches this parcel.
Architectural heritage
No building of the National Inventory of Architectural Heritage stands on this parcel.
Designated sites: National Parks and Wildlife Service. Recorded monuments: Sites and Monuments Record, National Monuments Service. Buildings: National Inventory of Architectural Heritage. Department of Housing, Local Government and Heritage, CC BY 4.0. Works at or in relation to a recorded monument need two months' written notice to the National Monuments Service (National Monuments (Amendment) Act 1994, section 12).
Ground and risks
- Radon
- At the centre of this parcel, about 1 in 10 homes in this area is likely to have high radon levels. Testing a home
- Landslides
- The 1:50,000 map rates the landslide susceptibility here as low.
- Terrain model
- No LiDAR survey of the Office of Public Works covers the centre of this parcel.
- Flooding
- The Office of Public Works publishes its flood maps on floodinfo.ie.
Radon Risk Map of Ireland, Environmental Protection Agency, and Landslide Susceptibility Classification, Geological Survey Ireland, both under CC BY 4.0. LiDAR: contains Irish Public Sector Data (Geological Survey Ireland & the Office of Public Works) licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence.
Download this parcel as DXF, in Irish Transverse Mercator metres, with its neighbours and buildings, for a drawing program. GeoJSON, in WGS 84, suits a map, and KML opens in Google Earth.
Registered freehold land, Tailte Éireann, CC BY 4.0. A parcel is the land of a title, not an address. The owner's name is in the Land Registry of Tailte Éireann: a copy of the folio can be ordered on landdirect.ie, for a fee.
- Area
- 152.2 ha
- 376 acres
- Land parcels
- 7
- registered freehold, median 2,970 m² (0.3 ha, 0.73 acres)
- Zoning
- —
- not in a zoned settlement
- Planning
- 2
- applications since 2010
Land parcels
Registered freehold land, Tailte Éireann
7 registered freehold parcels lie mostly in Williamstown, from 973 m² to 1,293,970 m² (129.4 ha, 319.75 acres). The dashed line is the townland's boundary. 14 neighbouring parcels touch it.
Download the townland as DXF, in Irish Transverse Mercator metres, with its boundary, parcels and buildings, or as GeoJSON or KML.
Zoning
Development plans, national zoning
No zone of a development plan covers Williamstown in the national zoning. Outside zoned towns and villages, the county development plan's rural policies apply to each application.
Source: Tailte Éireann and the Department of Housing (MyPlan), national zoning, CC BY 4.0.
Planning applications
Sites that touch the townland, newest first
14 Oct 2025Conditional
EirGrid PLC, with the consent and approval of the Electricity Supply Board (ESB), intends to apply for permission for works to uprate the existing Rinawade – Dunfirth Tee – Kinnegad 110kV overhead line (OHL). Within County Meath, the proposed development will take place within the following townlands: JARRETSTOWN, WALTERSTOWN, MOOR OF MEATH, RATHLEEK, GRANGE, BOGGANSTOWN, CAPPAGHCREEN, BROWNSTOWN, SALESTOWN, AFFOLLUS, KILGRAIGUE, HARRISTOWN, PORTERSTOWN, KILCLONE, KIMMINS, BARROCKSTOWN, BALLYMAGILLIN, MULHUSSEY, FERRESTOWN, RODANSTOWN, BATTERSTOWN, DOLANSTOWN, CALGATH, BALFEAGHAN, KILGLIN, FERRANS, CASTLEJORDAN, GORTNAHORNA, KILLASKILLEN, CLONGALL, KNOCKERSALLY OR COLEHILL. The Rinawade - Dunfirth Tee - Kinnegad 110 kV OHL circuit runs through County Meath, County Kildare and County Offaly. It is 54 km in length and travels from Kinnegad 110 kV substation in Killaskillen (County Meath) and traverses southeast where a short loop into Dunfirth 110 kV substation in Dunfirth (County Kildare) exists. The line then continues southeast where it terminates at Rinawade 110kV substation in Rinawade Lower (County Kildare). The OHL has a total of 249no. supporting structures. Within the functional area of Meath County Council, there is 23.16 km of the existing OHL circuit, with 107 no. structures. Within the functional area of Kildare County Council there is 30.66 km, with 140 no. structures, and within the functional area of Offaly County Council there is 0.42 km, with 2 no. structures. Separate planning applications will be lodged with Kildare County Council and Offaly County Council. The proposed development within Co. Meath will comprise: • the replacement (“restringing”) of the existing OHL circuit conductor wires with a new higher capacity conductor between structure numbers 1 - 37, 185 - 214, and 218 - 223; • the replacement of angle mast in-situ at 1no. location, with a new angle mast; • the strengthening of tower foundations at 3no. locations; • the strengthening of towers (i.e., member replacement) at 5no. locations; • the painting of towers at 7no. locations; • shear block remedial works of towers at 1no. locations; • the replacement of polesets at 38no. locations, with similar structures. There will be no change in height at 12no. poleset replacements. There will be height increases between 0.1m and 2.0m at 26no. poleset replacements. • the replumbing of polesets at 11no. locations; • the replacement of insulating and ancillary hardware at
Permission · Meath County Council, 2561103
13 Oct 2025Conditional
works to uprate the existing Rinawade – Dunfirth Tee – Kinnegad 110kV overhead line (OHL). Within County Kildare, the proposed development will take place within the following townlands: Confey, Parsonstown, Barnhall, Easton, Rinawade Upper, Rinawade Lower, Castletown, Oldcarton, Nicholastown, Killickaweeny, Cappagh, Newtown, Ballynakill, Ballyvoneen, Dysart, Dunfierth, Coolree, Kilmurry, Thomastown, Kilshanchoe, Clonagh, Cadamstown, Tanderagee, Calfstown, Ballinderry, Balrinnet, Kilglass, Nurney, Williamstown, Ballindoolin, Carrick, Grange East, Rahin. The Rinawade - Dunfirth Tee - Kinnegad 110 kV OHL circuit runs through County Meath, County Kildare and County Offaly. It is 54 km in length and travels from Kinnegad 110 kV substation in Killaskillen (County Meath) and traverses southeast where a short loop into Dunfirth 110 kV substation in Dunfirth (County Kildare) exists. The line then continues southeast where it terminates at Rinawade 110kV substation in Rinawade Lower (County Kildare). The OHL has a total of 249no. supporting structures. Within the functional area of Kildare County Council, there is 30.66 km of the existing OHL circuit, with 140 no. structures. Within the functional area of Meath County Council there is 23.16 km, with 107 no. structures, and within the functional area of Offaly County Council there is 0.42 km, with 2 no. structures. Separate planning applications will be lodged with Meath County Council and Offaly County Council. The proposed development within Co. Kildare will comprise: the replacement (“restringing”) of the existing OHL circuit conductor wires with a new higher capacity conductor between structure numbers 93 - 153, 224 - 226, and 240 - 247; the strengthening of tower foundations at 9no. locations; the strengthening of towers (i.e., member replacement) at 14no. locations; the painting of towers at 15no. locations; shear block remedial works of towers at 1no. location; the replacement of polesets at 43no. locations, with similar structures. There will be no change in height at 6no. poleset replacements. There will be height increases between 0.1m and 2.0m at 33no. poleset replacements. Poleset numbers 67, 72 and 132 will increase in height no greater than 3.0m, and poleset number 151 will increase in height no greater than 4.0m; the replumbing of polesets at 14no. locations; the replacement of insulating and ancillary hardware at all structures where conductor wires will be replaced; the replacement of stay wire/a
Permission · Kildare County Council, 2561155
Source: National Planning Applications, Department of Housing, Local Government and Heritage, CC BY 4.0. Applicants are not shown.
Nature and heritage
Designated sites and recorded monuments
Designated sites
No designated site (Special Area of Conservation, Special Protection Area, Natural Heritage Area or proposed one) touches the townland of Williamstown.
Recorded monuments
No recorded monument lies in the townland of Williamstown.
Architectural heritage
No building of the National Inventory of Architectural Heritage stands in the townland of Williamstown.
Designated sites: National Parks and Wildlife Service. Recorded monuments: Sites and Monuments Record, National Monuments Service. Buildings: National Inventory of Architectural Heritage. Department of Housing, Local Government and Heritage, CC BY 4.0. Works at or in relation to a recorded monument need two months' written notice to the National Monuments Service (National Monuments (Amendment) Act 1994, section 12).
Ground and risks
Radon, landslides, flooding
- Radon
- At the centre of the townland of Williamstown, about 1 in 10 homes in this area is likely to have high radon levels. Testing a home
- Landslides
- The 1:50,000 map rates the landslide susceptibility here as low, partly inferred.
- Terrain model
- No LiDAR survey of the Office of Public Works covers the centre of the townland of Williamstown.
- Flooding
- The Office of Public Works publishes its flood maps on floodinfo.ie.
Radon Risk Map of Ireland, Environmental Protection Agency, and Landslide Susceptibility Classification, Geological Survey Ireland, both under CC BY 4.0. LiDAR: contains Irish Public Sector Data (Geological Survey Ireland & the Office of Public Works) licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence.
Homes sold
Property Price Register
No address of the register names Williamstown with five sales or more. The sales of the area are on the page of Co. Kildare.
The townland
- Name
- Williamstown
- Area
- 1,521,645 m² (152.16 ha, 376.01 acres)
- Civil parish
- Nurney, and its townlands
- Barony
- Carbury
- Electoral division
- Kilrainy, the unit of the census
- Census 2022
- 773 people lived in 241 households in the Kilrainy electoral division. 82% of households owned their home. 41% of homes were built since 2001. 6% of dwellings stood vacant on census night, and 0% were holiday homes.
- Neighbouring townlands
- Ballindoolin, Ballygibbon East, Fearavolla, Freagh, Haggard, Nurney, Rinaghan, Windmill
- Placenames
- Williamstown on logainm.ie, the Placenames Database of Ireland
Townlands, civil parishes, baronies and electoral divisions, National Statutory Boundaries, Tailte Éireann, CC BY 4.0. Census 2022, Small Area Population Statistics by electoral division, Central Statistics Office, CC BY 4.0. A townland is the smallest land division of Ireland, and the unit of a rural address. Old registers such as the 1901 and 1911 censuses file it under its civil parish and barony.